Features :
- ATmega32U4 The USB microcontroller run with 16MHz and Arduino Leonardo boot loader.
- 32KB FLASH; Arduino Leonardo bootloader preinstalled, 2.5KB SRAM and 1KB EEPROM
- Direct USB download and communication. Not require external programmer
- 25 Programmable I/O pins include 11 analog inputs. Available with 3-pin of 2mm. JST connectors and routed to 2.54mm. IDC female header
- 11 of 10-bit ADC channels
- UART, I2C bus and SPI communications
- Mini USB connector
- Powered by +6 to +12V external power supply. Apply to DC adaptor jack and 2-pin terminal block
- POWER slide switch
-
On-board +5V regulator power supply circuit
- High-quality PCB with ROHS
- Measures approx. 9 x 5.8cm.
- ISP connection pad (program chip using external programmer - require soldering the connector)
- USB status LED
- RESET button
- User button
Included :
GLCD-XT : Color graphic LCD extension shield board, ZX-LED/ZX-SWITCH/ZX-POTH/ZX-SPEAKER